Operation Instructions Kobold
-
Why is the Wi-Fi light on my VR300 robot vacuum flashing?
Your VR300 is telling you that it cannot connect to the network you previously set up. Make sure that the VR300 can receive the Wi-Fi signal from your router in its current position, and that your ...
-
I've unpacked the VR300 robot vacuum cleaner and now it won't switch on. Is it broken?
Connect your base station to a plug socket.Connect your VR300 to the base station.When your base station is connected to a plug socket and the VR300 is connected to it, the robot will switch on aut...
-
I recently set spot cleaning to 4x4 m mode using the Kobold Robot app. I have just started spot cleaning again from the device itself, but the VR300 robot vacuum cleaner is only cleaning a 2x2 m area! Why is that?
4x4m spot cleaning can only be activated using the Kobold robot app. Pressing the Spot button on the device itself always starts 2x2m spot cleaning.
-
Why does my VR300 not go anywhere after I pressed the green Start button and the light display flashed, then I pressed the green Start button again?
If your VR300's battery is less than 25% charged, it cannot start a new cleaning program. You can tell whether your VR300 is less than 25% charged because only the top two rows of the [light displa...
-
Why does the Base symbol on my VR300 robot vacuum cleaner take a few moments to light up, even though it started from the base station?
The VR300 needs a few moments to locate its base station and to process information about where it is. So it is normal for the "Base" symbol not to light up immediately when the VR300 is first star...
-
What should I know about Robot - WLAN Integration & Coupling with the App Account?
The explanation of connecting the Robot to the App account starts at 2:15 min. If the Robot should not activate the Hotspot mode by pushing both Touch Buttons continuously and at the same time, ple...
-
Why isn't my robot vacuum cleaner starting to clean?
If the robot “goes to sleep”, you need to press the Start button twice to activate the normal cleaning mode. (once to "wake up" the device and once to actually start the robot vacuum cleaner).